Synology SA3200D

Liên hệ để biết giá (giá chưa bao gồm VAT)

Number of controller module 2
CPU (per controller) Intel Xeon D-1521 4-core 2.4 GHz, Turbo Boost up to 2.7 GHz
Hardware encryption engine Yes (AES-NI)
Memory (per controller) 8 GB DDR4 ECC UDIMM (expandable up to 64 GB)
Compatible drive type 12 x 3.5″/2.5″ SAS SSD/HDD (drives not included)
Hot swappable drive Yes
External port (per controller) 1 x expansion port
Size (HxWxD) • 88 x 430.5 x 692 mm
• 88 x 482 x 724 mm (with server ears)
Weight 19.7 kg
LAN (per controller) • 2 x 1GbE RJ-45
• 1 x 10GbE RJ-45 (10GBASE-T)
PCIe 3.0 slot (per controller) • 1 x 8-lane x8 slot
• High-performance network interface card support
System fan (per controller) 2 (60 x 60 x 51 mm)
AC input power voltage 100 V to 240 V AC
Power frequency 50/60 Hz, single phase

Hãng sản xuất: Synology
Tình trạng: Đặt hàng 02-03 tuần
Bảo hành: 36 tháng chính hãng

Mua ngay

Thông số sản phẩm

Mô tả chi tiết

Controller

Number of Controller Module 2

CPU

CPU Model Intel Xeon D-1521
CPU Quantity (per controller) 1
CPU Architecture 64-bit
CPU Frequency Quad Core 2.4 (base) / 2.7 (turbo) GHz
Hardware Encryption Engine (AES-NI)

Memory

System Memory (per controller) 8 GB DDR4 ECC UDIMM
Pre-installed Memory Module (per controller) 8 GB (8 GB x 1)
Total Memory Slots (per controller) 4
Expandable Memory (per controller) 64 GB (16 GB x 4)
Notes
  • Synology reserves the right to replace memory modules with the same or higher frequency based on supplier’s product life cycle status. Rest assured that the compatibility and stability have been strictly verified with the same benchmark to ensure identical performance.
  • Please select Synology memory modules for optimum compatibility and reliability. Synology will not provide complete product warranty or technical support if non-Synology memory modules are used for memory expansion.

Storage

Drive Bays 12
Maximum Drive Bays with Expansion Unit 36 (RXD1219sas)
Compatible Drive Type* (See all supported drives)
  • 3.5″ SAS HDD
  • 2.5″ SAS HDD
  • 2.5″ SAS SSD
Maximum Internal Raw Capacity 192 TB (16 TB drive x 12) (Capacity may vary by RAID types)
Maximum Raw Capacity with Expansion Units 576 TB (192 TB + 16 TB drive x 24) (Capacity may vary by RAID types)
Maximum Single Volume Size*
  • 200 TB (32 GB RAM required, for RAID 5 or RAID 6 groups only)
  • 108 TB
Hot Swappable Drive
Notes
  • “Compatible drive type” indicates drives that have been tested to be compatible with Synology products. This term does not indicate the maximum connection speed of each drive bay.
  • The maximum raw capacity is not limited by the maximum single volume size. Synology NAS models may utilize capacities over the maximum single volume size as long as each volume created is below the limit. (Learn more)
  • Each internal volume (may consist of multiple drives) is expandble up to 108TB (with memory less than 32GB) or 200TB (with memory equal to or greater than 32GB).

External Ports

RJ-45 1GbE LAN Port (per controller) 2 (with Link Aggregation / Failover support)
RJ-45 10GbE LAN Port (per controller) 1
Expansion Port 1

PCIe

PCIe Expansion (per controller) 1 x Gen3 x8 slot (x8 link)
Add-In-Card Support PCIe Network Interface Card (Learn more)

File System

Internal Drives
  • Btrfs
  • EXT4

Appearance

Form Factor (RU) 2U
Size (Height x Width x Depth) 88 mm x 430.5 mm x 692 mm
Size (Height x Width x Depth) (with server ears) 88 mm x 482 mm x 724 mm
Weight 19.7 kg
Rack Installation Support* 4-post 19″ rack (Synology Rail Kit – RKS1317)
Notes The rail kit is sold separately

Others

System Fan 60 mm x 60 mm x 2 pcs
Fan Speed Mode
  • Full-Speed Mode
  • Cool Mode
  • Quiet Mode
Easy Replacement System Fan
Power Recovery
Noise Level* 51.3 dB(A)
Power Supply Unit / Adapter 500 W
Redundant Power Supply
AC Input Power Voltage 100 V to 240 V AC
Power Frequency 50/60 Hz, Single Phase
Power Consumption* 417.48 W (Access)
274.38 W (HDD Hibernation)
British Thermal Unit 1425.45 BTU/hr (Access)
936.85 BTU/hr (HDD Hibernation)
Notes
  • Noise Level Testing Environment: Fully loaded with Seagate ST8000NM0075 hard drive(s) in the idle state. Two G.R.A.S. Type 40AE microphones, each set up 1 meter away from the Synology server at the front and rear. Background noise: 16.49-17.51 dB(A); Temperature: 24.25-25.75˚C; Humidity: 58.2-61.8%.
  • Power consumption is measured when it is fully loaded with Seagate ST3600057SS hard drive(s).

Temperature

Operating Temperature 0°C to 35°C (32°F to 95°F)
Storage Temperature -20°C to 60°C (-5°F to 140°F)
Relative Humidity 5% to 95% RH

Certification

  • EAC
  • VCCI
  • CCC
  • RCM
  • FCC
  • CE
  • BSMI

Warranty

5 Years
Notes The warranty period starts from the purchase date as stated on your purchase receipt. (Learn more)

Environment

RoHS Compliant

Packaging Content

  • Main Unit X 1
  • Accessory Pack X 1
  • AC Power Cord X 2
  • Quick Installation Guide X 1

Optional Accessories

  • D4EC-2666-8G DDR4 ECC UDIMM*
  • D4EC-2666-16G DDR4 ECC UDIMM*
  • Surveillance Device License Pack
  • Expansion Unit: RXD1219sas X 2
  • Synology Ethernet Adapter E10G17-F2
  • Synology Ethernet Adapter E10G18-T1
  • Synology Ethernet Adapter E10G18-T2
  • Synology Rail Kit Sliding – RKS1317
  • VS360HD
  • VS960HD
Notes All memory modules will operate at the maximum frequency specified by the CPU manufacturer.

Notes:

  • Model specifications are subject to change without prior notice.
  • The figures are based on Synology internal testing. No other services or applications are processed during the performance tests.
028 73053055